출처: http://kb.open-e.com/entry/113/
Symptom:
Monitor prompt a "System Corrupted No USB flash module has been found" error message.
Problem:
Module is unable to boot from BIOS
Solution:
Try disabling USB 2.0 on the motherboard BIOS.
Some motherboards will have the option to select USB 2.0 or USB 1.1 If this is the case select USB 1.1
If this does not work try the DOM in another USB port and or another server
Also try reflashing your DOM, To do this:
Download the latest release for the software that you have and burn it to a CD with the "write ISO image" option.
Here is the link:
http://www.open-e.com/account/products-and-updates/
Boot from the CD and choose option 1 "update with configuration changes saved"
Remove the CD and restart your server
Please make appropriate changes to your BIOS for the correct BOOT order.
If the error persist then download the Demo CD Here is the link:
http://www.open-e.com/service-and-support/demo-cd-downloads/
Burn the ISO-file onto a CD. Please make sure that you choose the option "Burn ISO image" or similar (depending on your burning software). Install the CD-ROM as the Primary Master device by plugging the CD-connection into the IDE slot. Change the BIOS to boot from the CD-ROM drive. Boot the system (the booting process may take several minutes).
Then contact support@open-e.com
': H/W' 카테고리의 다른 글
스토리지 RAID 종류 및 특징 (0) | 2009.10.29 |
---|---|
IBM System p570 (0) | 2009.08.13 |
VTL (Virtual Tape Library) 개념 (0) | 2008.11.24 |
Hot Swap 와 Hot Plug 차이점 (0) | 2008.07.02 |
스토리지 컨설팅 (5) - 효과적인 IT 자원 관리를 위한 스토리지 용량 계획 (0) | 2008.04.30 |